免烘烤阳极氧化铝油墨

1、适用范围：五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印 
2、特性：耐冲压、耐折弯、免烘烤自干、耐酒精、耐酸碱、耐汽油、耐腐蚀。 
3、技术参数： 
a.粘度：8000-12000CPS； 
b.细度：5UM↓、光泽：60°↑； 
c.干燥条件：自干24小时； 
d.铅笔硬度：2H↑； 
e.耐酒精：99%乙醇500g力来回**过30次； 
f.耐磨：500g力来回**过30次； 
g.过网性能：77T-145T网纱； 
4、稀释剂的选择：稀释剂：S-3；使用前添加10%-15%的DB-01固化剂效果更好。 
5、注意事项： 
a.不可与其它油墨混用； 
b.使用S-3慢干稀释剂稀释； 
c.加过固化剂的油墨必须在3小时内用完； 
d.密封保存，远离火源。 
6、应急处理措施： 
备注：由于材料及使用中的变数，可能是结果会有变化，以上数据仅供参考，使用前请自行测试。 
1, the scope of application: no halogen ink can be printed, ABS, PC, PS, acrylic, metal, electroplating, UV surface. 
2, characteristics: medium and dry, ethanol, acid resistance. 
3, technical parameters: 
A. viscosity: 8000-12000CPS; 
B.: 5UM:: gloss, fineness of 60 degrees up; 
C. dry conditions: 24 hours from dry; 
D. pencil hardness: 2H up; 
E. resistance to alcohol: 99% ethanol 500g force back and forth more than 30 times; 
F. wear: 500g force back and forth more than 30 times; 
G. n e t performance: 77T-145T; 
4, thinner choice: thinner: S-3; before using the 10%-15% to add DB-01 curing agent better effect. 
5, matters needing attention: 
A. and other printing ink; 
B. using S-3 slow dry diluent dilution; 
C. plus the curing agent of the ink must be used up within 3 hours; 
D. sealed to save, away from the fire source. 
6, emergency treatment measures: 
A. such as dipped into the eye immediately clear water cleaning, serious medical treatment, 
B. fire fighting measures: dry powder, foam fire extinguisher or sand. 
] Note: due to the materials and the use of variables, possibly is the change, the above data are for reference only, before using please self testing.